Use the right fluid
Run only JEM Low-Fog Fluid — Quick Dissipating, standard or High Density — to tune the look. Do not mix fluid types in the reservoir.
- QD lighter, faster
- Standard the benchmark
- HD waterfall / curtain
Prime & run
One-touch priming gets fluid into the lines. Allow 5–7 minutes ready time from cold; the 5 L reservoir gives about an hour of continuous output.
- Ready: 5 min (min) / 7 min (optimal)
- Reservoir: 5 L ≈ 1 hour
Clean regularly
Use JEM Pro-Clean & Storage Fluid on a consistent schedule to reduce clogging and extend heat-exchanger life. The machine also runs an automatic purge on shutdown.
- Pro-Clean & Storage — P/N 97122013
Store it right
Before storing for the season — or even a short break — prime Pro-Clean & Storage Fluid into the lines. It helps prevent corrosion, blocking and start-up issues.
Empty the condensate
The closed-loop system collects waste condensate in a 0.5 L reservoir with an LED-illuminated sight gauge — check and empty it as part of your routine.
Spare parts & service
Genuine JEM spare parts and service support are available through JEM Professional. Contact us for parts, service tools and heat-exchanger part numbers.
Applies to the JEM Glaciator Dynamic. For full operating and service instructions, refer to the product user & service manuals or contact JEM Professional.